8 COLOR HIGH SPEED FLEXOPRINTING MACHINE
| Printing Width (mm) | ||||||
| Mode | Size | 500 | 800 | 1000 | 1200 | 1400 |
| Color | 2, 4, 6, 8 colors | |||||
| Printing Length(mm) | 200-900 | |||||
| Total Power (kw) | 2 color | 9 | 12 | 14 | 16 | 18 |
| 4 color | 11 | 14 | 16 | 18 | 20 | |
| 6 color | 18 | 21 | 23 | 26 | 28 | |
| 8 color | 20 | 23 | 25 | 30 | 32 | |
- This Machine is suitable to printing of rolling paper. Packing paper glass paper, P.P., P.E. and Polysterene HDPE etc.
- Robust construction minimizes space occupied and enhances productivity.
- Using hydraulic system to set the printing plates, it is easy and accurate. There will be no defects when starting and stopping the machine.
- The built-in impression counter can be presented and stops the machine automatically when the desired quality of prints is acquired, and starts again on reset.
- The throw-off or on action of printing cylinder is hydraulically operated. The interlocking mechanism keeps the inking rolls running to avoid drying of ink on such rolls, accomplishing the throw-off of printing cylinder.
- Using a hot-air dryer and a cold-air fan simultaneously, it makes the production speedier. The dryer and fan will shut down automatically when the machine stops, it makes this machine more safe.
- The built-in stops the machine automatically.
- UNWIND UNIT
- PRINTING UNIT
- MAIN DRIVE
- INFEED & OUTFEED UNIT
- DRYING UNIT
- REGESTRATION UNIT
- INKING UNIT
- REWIND UNIT
- SIDE FRAME CONSTRUCTION
- DUPLEX SYSTEM
|
TECHNICAL INFORMATION |
|
|
Type of Machine |
High Speed Flexographic Printing machine |
|
No. of Printing Station |
Eight Colour |
|
Printing Posibilities |
8+0, 2+6, 4+4 |
|
Power Requirement |
26HP |
|
Supply Voltage |
415 V, 3phase, 50cycles/sec, 4 wires |
|
Floor Space Require |
|
|
Length |
6mtr |
|
Hight |
3mtr |
|
Width |
3mtr |
|
Maximum Roll outer Diameter at |
|
|
Maximum Printing Roll Weight at Unwind & Rewind |
500kgs. |
|
Core Inside Diameter |
Manual Shaft with reel cones – 76 mm ID |
|
Type of Unwind Tension Control |
Duplex Center Winding |
|
Unwind Tension Control |
Manual Spring Loaded Friction Type Woolen |
|
Unwind side Displacement |
Web Guiding System (Pneumo Hydraulic |
|
Main Drive |
Programmable AC Drive |
|
Type of Rewind Station |
Duplex Centre Winding |
|
Rewind Tension Control |
5 HP AC Programmable Drive |
|
Tension Feeback |
N.A. |
|
Drying System |
Hot Air (Heater System) |
|
Air Source |
Centrifugal Blower |
|
Heating Source |
Electric Heater |
|
Material to be Printed |
LD, LLDPE, HM HDPE, P.P, CO- EXTRUDED PLASTIC |
|
Material require for Printing |
Printing Ink |
|
Reducer |
|
|
Photopolymer |
|
|
Mounting |
|
|
Packing |
|
|
Paper |
|
|
Main Motor |
7 1/2 |
|
Cylinder as per customer requirement |
|
|
One set of Cylinder will be free |
Of 16 or 18” |
